#10 Valve In Head

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • #10 Valve In Head

Pentek VIN-34-PR10 Valve In Head #10 Blue Filter Housing 24% OFF

Model #: 150164

Availability: In stock



Quick Overview

Pentek VIN-34-PR10 Valve In Head #10 Blue Filter Housing. Makes filter changes much easier.

This housing can be used with an anion resin cartridge to effectively reduce PFAS in your water. Anion resins are effective by removing negatively-charged ions (PFAS) through a positively-charged matrix. These negative ions are then replaced by positive ions such as chloride, which electronically neutralizes the tank and gives you safe, clean water. Read more about PFAS reduction

Get an unbreakable wrench to tighten and loosen the Pentek 150164. The #1 Steel Water Filter Housing Wrench is designed and manufactured in the USA to work with your Pentek 150164 Filter Housing.


  • Dimensions of #10 Standard Whole House Housings: 12-1/2" x 5-1/8" (318 mm x 130 mm)
  • Maximum Temperature: 125°F (51.7°C)
  • Maximum Pressure: 125 psi (8.62 bar)
  • Initial ΔP (psi) @ Flow Rate (gpm): 4 psi @ 8 gpm (0.3 bar @ 30 L/min)


  • Housing: Polypropylene (Blue)
  • Cap: Reinforced Polypropylene
  • O-Ring: Buna-N
  • Button Assembly: 300-series Stainless Steel, EPDM, and Polypropylene
  • Valve Parts: Delrin

Popular Filter Choices

Additional Information

Model # 150164
SKU 150164
Manufacturer Pentek
Cartridge Filter Length 10 inch
Housing Length 10 inch
Filter Diameter 2.5 inch
Housing Style Standard
Inlet / Outlet 3/4 inch
Relief Valve Yes
Cap Standard
Color Blue
UPC 799932596308