The industry's only EPA & NSF Approved sanitizer that delivers reliable, effective results every time

Sani-System Liquid Sanitizer Concentrate is the only EPA registered & NSF approved sanitizer for use in and reverse osmosis units. It’s proven to kill 99.99% of harmful bacteria without using chlorine, oxidizers or acids that can harm system equipment, parts and resin. Each packet of concentrated formula sanitizes equipment in just 60 seconds and is available in exact pre-measured doses for RO units. Sani-System’s no-mess ease and accuracy answers our industry’s most important sanitizing concerns. Sani-System is effective, efficient and easy to use – it’s as simple as that!

Water treatment equipment should be sanitized regularly to maintain quality service levels. If equipment is not properly cared for, bacteria begins to grow and multiply wherever the water sits, including on the inside surfaces of tanks and hoses. Putting impure water in the tank can also be a cause, but over time, bacteria grows — even in chlorinated water. When water sits in a tank or hose, chlorine levels drop, reducing its chemical ability to prevent bacterial growth. Filters can also filter out chlorine, making the water more susceptible to bacterial growth. In addition, system equipment such as hoses, filters and canisters can harbor and help to support bacterial growth.

Sani-System RO Liquid Concentrate Sanitizer User Benefits:

Faster, easier and safer than other alternative sanitizers
Easy and reliable single dose packets
99.99% effective kill rate against harmful bacteria
Only sanitizer on the market proven by the WQA to safely sanitize an RO unit membrane

Sani-System eliminates harmful micro-organisms:
When used as directed, Sani-System kills bacteria such as Staphylococcus aureus (Staph), Escherichia coli (E. coli), Listeria and other micro-organisms that grow on the untreated surfaces of water quality equipment like water softeners and RO units. It eliminates odors and sanitizes tanks, lines and hoses. Specialized products similar to Sani-System are commonly used in restaurants, food processing plants and medical facilities to sanitize drinking glasses, food preparation equipment and other hard surfaces.

Sani-System Sanitizes in Five Easy Steps:

Shut off water supply to RO unit and remove membrane and all filters. Use rubber gloves and store filters and membranes in water to prevent damage.
Open your water faucet and depressurize system.
Pour entire packet directly into first main housing unit. Make sure pure water faucet is closed and turn on water supply.
Allow system to fill with water. Time will vary depending on water pressure. However, system should be full within 5 – 10 minutes without filters or membrane. Flush system two times.
Replace or re-install membranes and all filters. *Leave membrane in unit for complete disinfection. Note: Sanitization time will increase significantly.